- U boot download for pogoplug update#
- U boot download for pogoplug tv#
- U boot download for pogoplug free#
U boot download for pogoplug update#
You can then automate your update to Dyndns by logging in to their site with your username/password and it will record your IP address as the address to go to whenever you logon.ĭD-WRT has a DDNS tab that will automatically logon and update the DYNDNS table to your current IP.
U boot download for pogoplug free#
You can replace this with whatever web address you already have or subscribe to a free DNS redirector like DYNDNS. and it is updated daily with my router's internet address. In this example, I am using a free DNS redirector from DYNDNS to use the site. This would mean, any reference to would automatically route to the pogoplug's port 80. If you have a DD-WRT router, you basically would have to just go to your router's IP (in my case 192.168.1.1) and pick the NAT/QoS tab, and setup Port From 88 to route to 192.168.1.99 and port 80. In this case, if your pogoplug has an IP address of 192.168.1.99 and the webcam stream are from port (for each webcam), then you would have to define an incoming port (from the net, example port 88) and route it to local port of 192.168.1.99:80. The webcam views are from local ports, but if you want this to be viewable from the internet, you would have to define routing tables using your router to route traffic from the internet port to a particular web stream. The top header is just a bunch of scripts I used to show the current temp, visitor info, current Winnipeg time and the time in Asia. Here's a sample of the final output of my webpage:
U boot download for pogoplug tv#
Basically the processing power of the Pogoplug is much more than the Raspberry Pi although graphically the Pi is much more capable with it's GPU.īut since my main purpose is to make a headless webcam security system (not plugged in to a TV or monitor), the Pogoplug is more suited for this application.
The Pogoplug V2 Grey has a 1.2Ghz Marvel Kirkwood ARM9 processor while the Raspberry Pi has a 700Mhz Broadcom BCM2835 ARM176 core with hardware floating point. Continuing on from our Raspberry Pi set-up of a streaming internet webcam, I have modified my setup to use a Pogoplug (or Dockstar, which is basically the same hardware) as my security camera system.
0 kommentar(er)
